Load-Securing Components - BÖCKMANN KK 3015/27 H Mode D'emploi

Folding out the telescopic crank-
down support leg
1. Pull the locking knob, swing the sup-
port leg down and let go of the locking
knob.
2. Attach the hand crank to the support
leg and crank until it is firmly touching
the ground.
3. Detach the hand crank and store
safely.
Folding in the telescopic crank-down
support leg
1. Attach the hand crank to the support
leg and crank until it is completely
raised.
2. Swing the support leg up and secure
with the locking knob.
3. Detach the hand crank and store
safely.

4.8 Load-securing components

The following components are used to
secure loads:
– Components for lashing light loads
– Components for lashing heavy loads
– Components for preventing loads
from slipping
4.8.1 Components for lashing light
loads
The following components are available
for lashing light loads up to 150 kg (daN):
– Side wall lashing rail (A)
– Ladder rack (B)
30
A Side lashing rails
Fig. 24: Side lashing rails
The side wall lashing rail is especially
suitable for lashing at specific points.
B Ladder rack
Fig. 25: Ladder rack
The ladder rack is especially suitable for
securing tall loads, for example, ladders
or similar items that protrude over the
trailer edge.
4 Features