Rear Prop Stands - BÖCKMANN KK 3015/27 H Mode D'emploi

4 Features
B Parking brake with button and
toothed segment
Fig. 18: Parking brake with button and
toothed segment
Applying the parking brake
• Pull the hand lever up until the brak-
ing effect is applied.
Releasing the parking brake
• Pull the hand lever up a bit further
while simultaneously pressing the
button to enable the hand lever to be
lowered towards the front.

4.7 Rear prop stands

The following rear prop stands can be
used:
– Basic version of adjustable support
leg (A)
– Reinforced version of adjustable sup-
port leg (B)
– Fold-out support leg (LINNEPE sup-
port leg) (C)
Operating Instructions
– Telescopic crank-down support leg
with retaining pin (D)
– Telescopic crank-down support leg
with locking knob (E)
A Basic version of adjustable sup-
port leg
Fig. 19: Basic version of adjustable support
leg
Extending the adjustable support leg
1. Unhook the safety chain.
2. Loosen the tommy screw and pull the
support leg down until it is firmly
touching the ground.
3. Tighten the tommy screw.
Retracting the adjustable support leg
1. Loosen the tommy screw and push
the support leg up until it is fully re-
tracted.
2. Tighten the tommy screw.
3. Secure the safety chain.
27