Displaying Information; Dispensing Steam - Astoria Sabrina SAE Manuel D'utilisation Et D'entretien

Sabrina
• Press the dose button that you would like to programme, e.g.
(the button will flash whilst it is being programmed).
• To confirm the dose, press the
button.
• In this case, the button will go off to indicate that it
has already been programmed.
• If desired, repeat this operation for the other dose but-
tons.
• When all the buttons have been programmed, press the
button.
All the groups will now be programmed this way.
Should you wish to programme them differently,
proceed to singularly programme the left-hand
groups one by one as illustrated above.
6.5.4

Displaying information

Depending on how the machine has been configured, some
information will appear on the display while the coffee is be-
ing dispensed.
Flow diagram of the time taken (ml/s) to dispense coffee per
individual group.
Group 1
To better understand the flowchart diagram, we
recommend downloading the information leaflet
found on our website.
42 260
of
button again or the
Hydraulic circuit pressure
value while coffee is being
dispensed.
Viewing the dispensing time (secs) for all groups.

6.6 Dispensing steam

Carefully move the steam nozzle using the specific
anti-scald rubber grip (1).
Do not direct the steam towards hands or other
parts of the body. Do not touch the steam nozzles with bare
hands; use the appropriate PPE.
Before using the steam nozzle, the condensation
draining operation must always be carried out for
at least 2 seconds.
• Immerse the steam nozzle into the liquid to be heated.
• Rotate the valve knob anticlockwise.
• The quantity of steam will be proportional to how open
the valve is.
• To stop dispensing, turn the valve's knob clockwise.
To optimally froth the milk, follow these simple rules:
• Heat only the amount of milk you intend to use; once
heated, it will have to be completely poured from the jug
and not heated again.
• Froth the milk which should be at a temperature of around
4°C.
1
1
USER Manual