Cleaning The Steam Nozzle; Cleaning The Raised Cup Grilles; Spare Parts; Decommissioning - Astoria Core200 AEP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
Core200
7.5.5

Cleaning the steam nozzle

Weekly
Clean the steam nozzle as follows:
• Insert the automatic steam wand into a jug with water
and a specific cleaner, in accordance with the manufac-
turer's instructions.
• Heat the solution with the steam nozzle.
• Let the nozzle cool down whilst keeping it immersed in
the solution for at least 5 minutes, so that cleaner can rise
inside the nozzle due to the cooling effect.
• Repeat the operation 2 or 3 times until no more milk resi-
due is dispensed.

Cleaning the raised cup grilles

7.5.6
Daily
Clean the raised cup grilles as follows:
• Remove the grille from its housing by pulling it until it is
fully unlatched.
• Clean with a cloth dampened in lukewarm water.
• Push the grille back towards the machine until it is fully
latched.

8. SPARE PARTS

Machine components and/or parts must only be replaced by
the Technician.
Under no circumstances is the User authorised to
replace machine components and/or parts.
46
160
of

9. DECOMMISSIONING

A Technician must be called out to decommission the ma-
chine as the equipment must be disconnected from the elec-
tricity and water mains, and all the internal circuits must be
emptied of water.
After being decommissioned, the machine can only be re-
commissioned by a Technician.
Under no circumstances are Users authorised to
decommission and/or recommission the machine
after long periods of inactivity.

10. DISASSEMBLY

The machine must only be dismantled by the Technician.

11. DISPOSAL

11.1 Disposal information

For the European Union and the European Economic Area
only.
This symbol indicates that the product cannot be disposed
of with household waste, pursuant to the WEEE Directive
(2012/19/EC), the Battery Directive (2006/66/EC) and/or the
national laws implementing those Directives.
The product should be handed over to a designated collec-
tion point, for example the dealer when purchasing a new
product with similar features, or an authorised collection
site that recycles electrical and electronic equipment waste
(WEEE), as well as batteries and accumulators. Improper
handling of this type of waste can have negative conse-
quences on the environment and human health, due to the
potentially hazardous substances which are usually found in
this kind of waste.
Your cooperation in correctly disposing of this product will
contribute to the effective use of natural resources and you
will avoid incurring fines provided by law. For more informa-
tion about recycling this product, contact either your local
authority, the entity responsible for waste collection, an au-
thorised dealer or your household waste disposal service.
Before disposing of the machine, we recommend
seeking advice from the Technician and/or the
seller.

11.2 Environmental information

The machine features an internal lithium button battery,
which is located in the circuit board and ensures data stor-
age.
Dispose of the battery in accordance with current national
regulations.
User manual

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Core200 sae

Table des Matières