Cup Warmer; Standby Mode - Astoria Core200 AEP Mode D'emploi

• Press the water button
• To confirm the dose, press the wa-
ter button again.
• When you have finished program-
ming, press the button or wait
20 seconds.
User manual
.

6.10 Cup warmer

For safety reasons, we do not recommend placing cloths or
other objects on the cup warmer shelf in order to prevent
the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warm-
er can reach temperatures that may cause
burns. Be very careful.
Place the cups to be warmed on the cup warmer shelf (17)
and turn the device's switch (23) ON.
17
Check that the indicator light (24) on the front of the ma-
chine lights up; when lit, this indicates that the cup-warming
device is active.
0
1 2

6.11 Standby mode

To activate the machine's standby function, proceed as fol-
lows:
• Press and hold the
panel and immediately afterwards, press and hold the
button.
• The button will start to "slowly" flash.
• To exit the standby mode, press the
same pushbutton panel.
Core200
23
24
button on the right pushbutton
button on the
41
of
160