Dispensing Cappuccinos; Cup Warmer; Sae Version; Display Version - Astoria Sabrina SAE Manuel D'utilisation Et D'entretien

Sabrina

6.9 Dispensing cappuccinos

• Insert the suction tube in the milk.
• Place the jug under the spout of the
cappuccino maker.
• Open the steam valve and when the
desired amount has been obtained,
close the steam valve.
• Pour the frothed milk into the cups
with the coffee.
To obtain hot non-frothed
milk, lift the cappuccino mak-
er flap upwards.
For better results, we suggest that you
do not dispense directly into the coffee
cup, but into a jug first, and then pour
the frothed milk on top the coffee.
Be sure to constantly keep the cappuc-
cino maker clean, by following the in-
structions provided in paragraph "7.5
Cleaning operations" on page 50.

6.10 Cup warmer

For safety reasons, we do not recommend placing
cloths or other objects on the cup warmer shelf in
order to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warmer
can reach temperatures that may cause burns. Be
very careful.
Place the cups on the cup warmer (1) shelf of the coffee ma-
chine.
The cup warmer temperature can be set according to person-
al requirements. The procedure for activating and adjusting
the cup warmer according to the model in your possession, is
described below.
44 260
of
1

6.10.1 SAE version

To adjust the cup warmer temperature or deactivate it, pro-
ceed as follows:
• When the machine is switched on, press the
the right pushbutton panel: the flashing LED will indicate
the current cup warmer configuration, as indicated in the
images below.
• Hold down the button until the LED on the panel goes
from a flashing to a steady light.
• Press the key that corresponds to the desired configura-
tion.
• Press the button to confirm the operation.
The indicator light on the front button panel will indicate
whether or not the cup warmer is on.
70°C
Cup warmer 80°C
Disabled

6.10.2 DISPLAY version

• Press the cup warmer icon
• When the cup warmer is on, the display will indicate this in
the manner illustrated below.
Cup warmer
on
To adjust the cup warmer temperature, see paragraph 6.11.4.
To deactivate the cup warmer, press the previous-
ly-indicated icon again.
button on
90°C 110°C
100°C
on the display.
Cup warmer on and heating
element in operation
USER Manual