Glossary And Pictograms; Glossary; Pictograms; Guarantee - Astoria Core200 AEP Mode D'emploi

Core200

1.5 Glossary and Pictograms

This paragraph lists uncommon terms or terms whose mean-
ings are different than those most commonly used.
Abbreviations are explained below, as well as the meaning of
pictograms describing the operator's qualification and the ma-
chine status; they are used to quickly and uniquely provide the
information needed to correctly and safely use the machine.

Glossary

1.5.1
User
The person in charge of operating the machine and perform-
ing the routine cleaning operations indicated in this manual.
Technician
A specialised person who has been specially trained and au-
thorised to carry out the following operations in accordance
with current regulations: transport and handling, storage, in-
stallation, commissioning, maintenance, decommissioning,
dismantling and disposal of the machine.
Danger
A potential source of injury or damage to health.
Dangerous area
Any area in the vicinity of the machine where the presence
of a person constitutes a risk to the safety and health of that
person.
Risk
Combination of the probability and severity of an injury or
damage to health that can arise in a hazardous situation.
Guard
Machine component used specifically to provide protection
by means of a physical barrier.
Personal protective equipment (PPE)
Clothing or equipment worn by someone to protect their
health or safety.
Intended use
The use of the machine in accordance with the information
provided in the instructions for use.
User qualification
Minimum level of skills an operator must have to carry out
the operation described.
Machine status
The machine status includes the mode of operation and the
condition of the machine's safety devices.
Residual risk
Risks that remain despite adopting the protective measures
integrated into the machine's design and despite the guards
and complementary protective measures that have been ad-
opted.
30 160
of
Safety component:
• Designed to perform a safety function.
• whose failure and/or malfunction endangers the safety
of persons.

Pictograms

1.5.2
Descriptions preceded by these symbols contain very im-
portant information/requirements, particularly in regards to
safety. Failure to comply with these may result in:
• A safety risk for those operating the machine.
• User injury, including serious injury (in some cases even
death).
• The guarantee being rendered null and void.
• The Manufacturer waiving liability.
GENERAL DANGER symbol used when there is a
risk of permanent serious injury that would re-
quire hospitalisation, or in extreme cases, even
cause death.
ELECTRICAL HAZARD symbol used when there is
a risk of permanent serious injury that would re-
quire hospitalisation, or in extreme cases, even
cause death.
HIGH TEMPERATURE HAZARD symbol used
when there is a risk of permanent serious injury
that would require hospitalisation, or in extreme
cases, even cause death.
CAUTION symbol used when there is a risk of mi-
nor injury that could require medical attention.
WARNING symbol used when there is a risk of mi-
nor injury that could be treated with first-aid or
similar measures.
NOTE symbol used to provide important informa-
tion about the topic.
Mandatory symbol indicating that safety gloves
must be worn; used when there is a risk of perma-
nent serious injury that would require hospitalisa-
tion.
Mandatory symbol indicating that the documen-
tation must be read; used to make the user aware
of the importance of this action for their safety.

1.6 Guarantee

All of the machine's components are covered by a 12-month
guarantee, except for electrical and electronic components
and parts prone to wear and tear.
User manual