Cleaning The Steam Spout; Spare Parts; Decommissioning; Dismantling - Astoria AL Série Manuel D'utilisation Et D'entretien

7.6.6 Cleaning the steam spout

Clean the steam spout once a week as follows:
Immerse the spout in a jug with water and a specific
detergent according to manufacturer's instructions;
heat the solution with the steam of the spout;
let the spout cool off keeping it
immersed in the solution for at
least 5 minutes to allow the de-
tergent to rise inside the spout by
cooling effect;
repeat the operation 2 or 3 times
until milk is delivered.
8.

SPARE PARTS

Machine components and/or parts must be replaced
only by the Manufacturer's Qualified Technicians.
The User must not replace the components and/or parts of the
machine.
9.

DECOMMISSIONING

The machine must be decommissioned by the Manu-
facturer's Qualified Technician, because the equipment
must be disconnected from the electricity and water
mains, and all the internal circuits must be emptied of
the water.
The commissioning of the machine after this period
must be performed only by the Manufacturer's Qualified
Technician.
The User must not perform decommissioning after long time and/
or commissioning of the machine.
10.

DISMANTLING

The dismantling of the machine must be performed
by the Manufacturer's. Qualified Technician.
46 160
of
11.

DISPOSAL

Information for disposal

11.1
Only for the European Union and the European Eco-
nomic Area.
This symbol indicates that the product cannot be
disposed of with household waste, according to the
WEEE Directive (2012/19/EC), the Battery Directive
(2006/66/EC) and/or the national laws implementing
those Directives.
The product should be handed over to a designated
collection point, for example the dealer when purchasing
a new similar product, or an authorized collection site
for recycling waste electrical and electronic equipment
(WEEE), as well as batteries and accumulators. Improper
handling of this type of waste can have negative conse-
quences on the environment and human health, due
to potentially hazardous substances that are generally
associated with this kind of waste.
Your cooperation in the correct disposal of this prod-
uct will contribute to the effective usage of natural re-
sources and avoid incurring the administrative sanctions
provided by law. For more information about recycling
this product, contact your local authorities, the body
responsible for waste collection, an authorized dealer,
or your household waste disposal service.
To dispose of the machine, it is advisable to refer to the
Manufacturer's Qualified Technician.

Environmental information

11.2
Inside the machine there is a button lithium battery
required for the storage of the data that is placed in the
electronic card.
Dispose of the battery in accordance with current
local regulations.
USER manual