EGO AURA-R2 RMR1500E Mode D'emploi page 20

View the operation log of your mower.
EN
◾
About
View the basic device information of your mower.
◾
Delete Device
Delete this device from your account.
◾
Factory Reset
Restore factory settings for this device.
MAINTENANCE
WARNING: To avoid serious personal injury, always switch off the
mower, and ensure that all moving parts have come to a complete
standstill, before cleaning, performing any maintenance or transporting
the mower.
WARNING: When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause product damage.
To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
WARNING: Always wear long trousers, work shoes, and protective
gloves when performing any maintenance on the product blades.
For better operation and longer service life, make sure to clean the
product regularly and replace worn parts.
We recommend the blades are regularly inspected and replacement
time should be once every 6-8 weeks, according to the mowing
schedules and grass types.
It is important that the blades rotate easily. The edges of the blades
should not be damaged. The lifetime of the blades varies immensely
and depends on for instance:
◾
Operating time and size of the mowing zone.
◾
Type of grass and seasonal growth.
◾
Soil, sand and use of fertilizers.
◾
The presence of objects such as cones, windfalls, toys, tools,
stones, roots and the like.
NOTE: Working with blunt blades gives a poorer mowing result. The
grass is not cut cleanly and more energy is needed resulting in the
product not mowing such a large area.
Clean the product
WARNING: Never use solvents for cleaning. Before cleaning, make
sure the product is switched off.
Chassis and blades
Inspect the blades once a week.
Press the OK button for 4 seconds to switch off the product.
1.
2. Lift the product onto its side.
3. Clean the blades and chassis using a brush. At the same time,
check that the blades are intact and rotate freely.
Wheels
The product does not operate satisfactorily on slopes if the wheels are
blocked with grass.
◾
Use a soft brush to clean the wheels
20
ROBOTIC MOWER — RMR1500E/RMR3000E/RMR6000E
Body of the product
◾
Use a moist cloth and a weak soap solution to clean the body of
the product.
Camera array
◾
Check and clean the camera array regularly. A stained camera
lens may affect the performance of the mower.
Charging contacts
Check if there is corrosion or dirt on the charging contacts, and clean
them in time. Otherwise, the mower cannot be charged due to poor
contact.
Charging station
WARNING: Disconnect the power supply from the power outlet
before maintenance.
NOTE: The product cannot enter the charging station if there are objects
in the charging station. Clean the charging station regularly.
Remove grass, twigs and other objects from the charging station.
Replace the Blades
WARNING: You must replace the screws when you replace the
blades. The used screws can wear quickly and allow the blades to
loosen, this can cause serious injury.
Replace worn or damaged blades for a safe operation. Replace the
blades regularly for a satisfactory cut result and a reduced energy use.
All 3 blades and screws must be replaced at the same time to get a
balanced cutting system.
To replace the blades (Fig. Q)
Push the STOP button.
1.
Press the OK button for 4 seconds to switch off the product.
2.
3. Turn the product upside down. Put the product on a soft and
clean surface to avoid scratching the product.
4. Rotate the skid plate so that its holes align with the screws for
the blade.
5. Remove the 3 screws with a flat-head or Philips screwdriver (not
included).
6. Remove the 3 blades.
7. Attach 3 new blades and screws.
8. Make sure that the blades can pivot freely.
Battery
CAUTION: Charge the battery fully before you put the product
into storage. If the battery is not fully charged it can cause damage to
the battery. If the operating time of the product is shorter than usual
between charges, this means that the battery is at the end of its life
cycle. Replace the battery to extend the operating time.
NOTE: The battery life is related to the length of the season and how
many hours a day the product operates. A long season or many hours
of operation a day means that the battery must be replaced more
regularly. Take your product to your EGO center service for battery
replacement.