EGO AURA-R2 RMR1500E Mode D'emploi page 18

path calculated by an algorithm for maximum efficiency. The mower
EN
can change its mowing direction according to your choices within the
EGO Connect app. This avoids repetitive mowing tracks. To customize
TM
mowing directions for each mowing zone, see the section "Manage
Multiple Zones".
Manage multiple zones
You can create multiple zones for your map, each zone with its own
unique name and a customized mowing direction, cut height and
mowing schedule.
For manual mowing, you can select to mow all zones or only some
of them. For scheduled mowing, you can set up schedules for all or
selected zones.
A zone is automatically created after the boundaries of a mowing zone is
mapped out. You can continue to create multiple zones and connect them
with paths, for instructions, see the section above "Create a Transport
Path".
To rename the zones (Fig. N1)
1. Tap (Device Details) > map management
2. Tap to select a zone
3. Tap Edit > Rename to set a name for the zone
To customize mowing direction
The mower can automatically change its mowing direction according
to your choices. You can choose one or more directions so that mower
changes the mowing direction every time it finishes a round of mowing.
1. Tap (Device Details) > map management
2. Tap to select a zone
3. Tap Edit > Mowing direction
To create or modify work schedules (Fig. N2)
1. Tap (Device Details) > work schedule
2. Select a day to set up a schedule.
3. Set the start time and end time of the schedule.
4. Select which zone(s) to apply the schedule.
5. Tap 'Save' to save the settings.
To enable or disable work schedules (Fig. N3)
You can disable the work schedules if you don't want the mower to
follow the schedule.
Enable or disable mowing cycle (Fig. N3)
When disabled, if the mowing progress in the selected zones reaches
100%, the mower will stop mowing and return to the charging station
even if the scheduled end time has not yet arrived. The mower will
restart when the next week mowing period arrives.
When enabled, if the mowing progress in the selected zones reaches
100%, the mower will start a new round of mowing and keep mowing
until the scheduled end time arrives.
EGO Connect App
TM
Introduction
The app is an important part of robotic mower, you can use the app to:
18
ROBOTIC MOWER — RMR1500E/RMR3000E/RMR6000E
1. Bind and activate the mower.
2. Create a map (mowing zone) with multiple mowing zones.
3. Check the status and work progress of the mower, remotely
control the mower to start, stop, or return to the charging
station, etc.
4. View and change mower work settings (map management,
mowing schedules, etc.).
5. View and change mower security/function settings (Headlight,
Reset PIN code, Anti-theft, etc.).
6. Update firmware, and change network connection.
7. Unbind and retain or clear user data.
Download, register, log in
1. Download EGO Connect app on your mobile device or scan QR
TM
Code below.
2. Create a new account in EGO Connect
an account, skip to step 4.
3. An e-mail will be sent to the registered e-mail address. Follow
the instructions in the e-mail to validate your account.
4. Log in to your EGO account in EGO Connect
Update EGO connect app and firmware
TM
To experience the latest features and updates, always keep your EGO
connect app up-to-date. You will receive a notification to remind you
TM
when there is a new version of the app.
To manually check firmware updates, tap (Device Details) > Firmware
update to show the current version and latest version.
To update the firmware, see the section "Update to the Latest
Firmware".
App homescreen (Fig. O)
The homescreen shows the status of the mower and work progress.
You can choose to view the mowing zone of all zones or selected zones,
start or pause mowing tasks, and send the mower home.
1. Battery level
2. Cellular signal strength
3. Bluetooth
®
4. Wi-Fi
5. Positioning signal
6. Tap to view device details
7. Tap to enter map management
8. Tap to enter PIN code
9. Tap to enter work schedule
10. Mower Status
app. If you already have
TM
app.
TM