Safety Instructions - Ego Aura-R2 Rmr1500E Mode D'emploi

NOTE: The following format is used in the Operator's manual to make it
EN
easier to use:
◾
Text written in italics is a text that is in the EGO Connect
is a reference to another section in the Operator's manual.
◾
Text written in bold is one of the buttons on the product.
OVERVIEW
Introduction
Product description (Fig. A)
The robotic mower is powered by a rechargeable lithium-ion battery
pack. Using the EGO Connect
TM
the boundaries of a mowing zone. The mower will then automatically
cut the grass within the boundaries. The mowing routes are calculated
by the algorithm according to the shape of the work area to achieve
the highest mowing efficiency. If the battery runs low before finishing
a mowing task, it will automatically go back to its charging station to
recharge.
The frequent cutting technique improves the grass quality and
decreases the use of fertilizers. Collection of grass is not necessary.
EGO Connect App (Fig. B)
TM
The EGO Connect TM app is an important part of the system. You can
follow the interactive guidance shown in the app to complete the
system installation and set up the mowing zone. You can also use the
app to adjust the settings of the mower, customize the mowing zone,
view the work status of the mower, control the mower remotely, etc.
How PATH IQ Works (Fig. C)
TM
EGO AURA-R2 robotic mower achieves unparalleled navigation accuracy
through an advanced fusion of RTK (Real-Time Kinematic), VIO (Visual-
Inertial Odometry), and vSLAM (Visual Simultaneous Localization and
Mapping) technologies, also known as PATH IQ
RTK positioning delivers centimeter-level accuracy by combining
satellite signals with a fixed reference data from either RTK antenna or
network RTK, ensuring the robot pinpoints its exact location even across
expansive lawns. VIO technology enhances reliability in GPS-challenged
areas—such as under tree canopies or near structures—by integrating
camera data and inertial sensors to track movement direction
and speed in real time. Meanwhile, vSLAM empowers the robot to
dynamically map its surroundings using onboard cameras, enabling it
to recognize obstacles, adapt to terrain changes, and optimize mowing
routes autonomously.
With intelligent PATH-IQ system, AURA-R2 eliminates dependency on
TM
physical boundaries while maintaining seamless operation in complex
environments. Whether navigating slopes, avoiding garden features, or
recovering from disruptions, this triple-layered localization ensures the
robot stays on course, delivering consistent performance with surgical
precision.

Safety Instructions

READ CAREFULLY BEFORE USE.
KEEP FOR FUTURE REFERENCE.
12
ROBOTIC MOWER — RMR1500E/RMR3000E/RMR6000E
app or
TM
app on your smartphone, you can define
.
TM
◾
This product is not intended for use by children or persons
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should not play with the appliance. Cleaning and user
maintenance shall not be done by children without supervision.
◾
The product must only be used with the equipment
recommended by manufacturer. All other types of use are
incorrect.
◾
Do not use the product when people, especially children, or
animals are in the work area.
◾
Warning signs must be put around the work area of the product
if it operates in public areas. The signs must have the text that
follows: Warning! Automatic lawn mower! Keep away from the
machine! Supervise children!
◾
To prevent damage to the product and accidents to vehicles
and people, do not map out work areas and paths across public
pathways.
◾
Keep a safe distance from the product when operating.
◾
Do not ride on the product.
◾
Do not touch moving hazardous parts, such as the blade disc,
before it has come to a complete stop.
◾
Always stop and switch off the product, remove the plug from the
power outlet:
-
before clearing a blockage on the machine;
-
before checking, cleaning or working on the machine or
charging station;
-
after striking a foreign object to inspect the machine for
damage;
-
if the machine starts to vibrate abnormally, and to check for
damage before restarting;
◾
If an injury or accident occur, seek medical assistance.
◾
Do not put power supply cable and low-voltage cable in the work
area, which can cause damage to the cables.
◾
Do not connect a damaged cable or plug, or touch a damaged
cable, before it is disconnected from the power outlet. Disconnect
the plug from the power outlet if the cable becomes damaged
while in operation. A worn or damaged cable increases the risk of
electrical shock. A damaged cable must be replaced by service
personnel.
◾
Never operate the product with a defective cover on charging
station.
◾
When you connect the power supply to the power outlet, use a
residual-current device (RCD) with a tripping current of maximum
30 mA.
◾
Only charge the product in the included charging station.
Incorrect use may result in electric shock, overheating or leaking
of corrosive liquid from the battery. In the event of leakage of
electrolyte, flush with water/neutralizing agent. Get medical aid if
corrosive liquid comes in your eyes.
◾
Use only original EGO batteries. Product safety cannot be
guaranteed with other than original batteries. Do not use non-
rechargeable batteries.
Original instructions