EGO AURA-R2 RMR1500E Mode D'emploi page 16

INSTALLATION AND MAPPING
EN
Before You Start
Prepare the app
To ensure a successful setup, please scan the QR code to download the
EGO Connect TM app. Alternatively, go to the Google Play Store (Android)
or the Apple App Store (iOS) and search EGO Connect
installing the app, register and log in. For a more detailed explanation
refer to the section "EGO Connect
NOTE: During use, the app will ask you for Bluetooth
and Wi-Fi networking permissions when necessary. To ensure normal
use, it is recommended that you enable the above permissions.
Clear the lawn
Remove debris, piles of leaves, toys, wires, stones, and other obstacles.
Make sure children and pets are off the lawn. Please cut your lawn to a
maximum height of 10 cm. Fill in holes in the lawn to make it level.
CAUTION: Holes with water in the lawn can cause damage to the
product.
Charge the mower for the first time
When the product is new or has been stored for a long period, the
battery can be empty and needs to be charged before starting.
WARNING: Only charge the product using a charging station and
a power supply which is intended for it. Incorrect use may result in
electric shock, overheating or leakage of corrosive liquid from the
battery. In the event of leakage of electrolyte flush with water and seek
medical help if it comes in contact with the eyes etc.
1. Place the product in the charging station.
2. Slide the product in as far as possible to ensure proper contact
between the product and the charging station.
3. The flashing GREEN indicator on the charging station indicates
that charging is in progress.
Pair EGO Connect with the Mower (Fig. G)
TM
Press and hold the OK button for 2 seconds to switch on the mower.
With EGO Connect App open and logged in follow on screen prompts
TM
to pair with your mower, if machine is not detected automatically, press
+Add button on the app homescreen. Follow on screen prompts to pair
your mower with a smartphone via Bluetooth
and hold the START and PARK buttons for 4 seconds when prompted
to put mower into pairing mode. Your device must be connected to a 4G
network or Wi-Fi network, and Bluetooth
for EGO connect. Follow the instructions via the app for other settings.
Activating Positioning Service Function
If you purchase the RTK antenna kit ARA2000, refer to the instructions
in the operator's manual of ARA2000.
If you choose network RTK service, follow the guidance via app.
16
ROBOTIC MOWER — RMR1500E/RMR3000E/RMR6000E
app. After
TM
App".
TM
, GPS positioning,
®
. You will need to press
®
permissions must be enabled
®
NOTE: All regions are not available through the network RTK. Please
contact after-sales service.
Examine Where to Put the Charging Station (Fig. H1, H2, H3)
You can put the charging station inside or outside the mowing zone. No
transport path is necessary if the charging station docking point is in
the mowing zone (a or b) (Fig. H1). The charging station docking point
is where the product stops after reversing from the charging station,
the reversing distance is 1 m by default, check your app map for the
exact position of docking point after the first work area is created. If the
docking point is not in the mowing zone, you must create a transport
path (c) (Fig. H1).
The installation process on the app will help guide you in selecting
appropriate location.
Where possible put the charging station where the docking point has an
unimpeded sky view (Fig. H2).
◾
Put the charging station near a power outlet.
◾
Put the charging station on a level surface (Fig. H3).
◾
The baseplate of the charging station must not be bent (Fig. H3).
◾
Do not cover the charging station.
◾
If the mowing zone has 2 parts separated with a steep slope, we
recommend putting the charging station in the lower section.
NOTE: Do not fix the charging station in place until prompted by the app
following site selection process.
CAUTION: Do not install the charging station where there are metal
objects in the ground. Metal objects can cause interference with the
charging station signal.
CAUTION: Do not put your feet on the baseplate of the charging
station.
Examine Where to Put the Power Supply
WARNING: Do not cut or extend the low-voltage cable. There is a
risk of electrical shock.
WARNING: The power supply cable and low-voltage cable must be
outside the mowing zone to avoid damage to the cables.
WARNING: Make sure that the plugs of the low-voltage cable and
the power supply are clean and dry before you connect them.
NOTICE: Maximum two low-voltage cables can be used, and using
more cables will affect product charging efficiency.
CAUTION: Make sure that the blades on the product do not cut the
low-voltage cable.
CAUTION: Do not coil up the low-voltage cable. The coil causes
interference with the signal from the charging station.
◾
Put the power supply in an area with a roof and protection from
the sun and rain.
◾
Put the power supply in an area with good airflow.
◾
Put the power supply at a minimum height of 30 cm from the
ground.
◾
Use a residual-current device (RCD) with a tripping current of
maximum 30 mA when you connect the power supply to the
power outlet.