Publicité
Sound distortion during CUE or REVIEW operation.
No sound distortion with other recorded tapes.
The recording level was too high.
The recorded signal itself was distorted.
Sound distortion
Sound distortion with other recorded taped as well. | Another component in your system is distorting the
sound.
The heads are dirty. (See "Cleaning tape heads' on page 10.)
Remote control operation is not possible.
The batteries in the remote control unit are dead.
There is an obstruction between the remote control
Remote control
:
unit and the deck.
The remote control unit is being operated outside of
the operating range.
Tunes are not played in the designated sequence.}@ The Start-IDs and tune numbers are not recorded
correctly.
There is an unrecorded blank area between tunes.
Program playback
or
Stops in mid-operation.
The Start-IDs and tune numbers are not recorded
Direct search
correctly.
e@ There is an unrecorded blank area between tunes.
A nonexistent tune number was designated in the
program.
:
Acertain section is skipped without being played | A Skip-ID is recorded on the tape.
(skip operation).
e@ Cancel the skip function.
e@ Erase the Skip-ID.
The tape starts rewinding during playback (or dur-
ing fast-forwarding).
@ The tape was wound fully to the end (automatic
rewind function).
e@ An End Mark is reached.
Playback starts after the tape is rewind.
The repeat playback function is operating.
Other
The tape counter does not display the time.
Time data is not recorded on the tape.
Playback or recording starts automatically when|
The TIMER switch is set to PLAY or REC.
the power is turned on.
RENUMBER function.
Only the recording indicator lights.
The deck was left in record-standby mode for more
than 5 minutes.
"ERR" appears and only the cassette tray can be| @ Condensation (See p.6)
opened/closed.
@ The heads are dirty. (See "Cleaning tape heads" on
page 10.)
93
<RRE1113>
En
Publicité
