Télécharger Imprimer la page

Hillrom Allen Advance Table Mode D'emploi page 61

Publicité

INSTRUCTIONS FOR USE
4.
Safety Precautions and General Information:
4.1
General Safety Warnings and Cautions:
WARNING:
Obey these safety instructions to help prevent patient fall, injury, and/or
equipment damage:
• Do not use if product shows visible damage.
• Prior to using this device, please read the instructions for equipment set up and
use. Familiarize yourself with the product before application on a patient.
• Read and understand all warnings in this manual and on the unit itself prior to
use with a patient.
• Make sure that the power switch can be accessed at all times during use.
Patient injury or equipment damage can occur.
• This device should be operated by trained persons only.
• The procedures in this manual are only manufacturer's suggestions. The final
responsibility for patient care with respect to this device remains with the
attending physician.
• No modification of this equipment is allowed.
• Patient support tops and accessories from Allen Medical are designed to
industry standard dimensions. Before you use products that are not from Allen
Medical, you must verify with the product manufacturer that the product can
be used safely with the Allen Advance Table.
• Before you use Allen® Patient Support Tops with a table not manufactured by
Allen Medical, you must verify with the product manufacturer that the support
tops can be used safely with their product.
• There are no known contraindications for use of the Allen Advance Table.
• Except for patient transfer, always use safety straps to help secure the patient
to the support top.
• Never remove a cross pin from a support top while a patient is on the support
top.
• Before each use of the unit, make sure that all parts are correctly installed and
that the unit operates correctly.
Document Number: 80028190
Version: E
Page 61
English
Issue Date: 16 MAY 2022
Ref Blank Template: 80025117 Ver. F

Publicité

loading

Ce manuel est également adapté pour:

A-71100-sch