Maintenance Summary Table; Implements - Grillo DUMPER 507 Manuel D'utilisation

PROCEDURE
check the level
Engine oil
Air filter
check/adjust
Spark plug
Check the level
Gearbox oil
Check that the engine intake grid is
clean
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
EXTENDIBLE LOAD BODY (fig. 16)
The width of the side boards can be adjusted to increase or decrease the load body overall
dimensions and its loading capacity:
- INTERNAL SIZE with closed body: 100 cm x 70 cm, H 40 cm
- INTERNAL SIZE with fully open body: 118 cm x 122 cm, H 40 cm
- EXTERNAL SIZE with closed body: 105 cm x 75 cm
- EXTERNAL SIZE with fully open body: 123 cm x 127 cm
WEIGHT: 74 kg
MAX. LOAD CAPACITY: 500 kg
DUMPER LOAD BODY
This type of body has been designed for transporting loose material such as sand, gravel soil etc...
It is equipped with closed toeboards with automatic front opening when the tipper is activated. The
Dumper body has a quick release hitch for replacing it with the normal body: in this case remove
the two pins and take out the two bolts (fig. 19). One person can do this on their own by lowering
out the support feet and opening the front toeboard (fig. 18)
SHOCK-ABSORBED OPERATOR BOARD
This board can be used exclusively to transport the operator, on plain grounds only and without
obstacles. It is recommended to use the operator's board when the load body is charged. Be very
careful when manoeuvring the machine and always keep a moderate speed. In case of danger,
fold the board and go on by foot (fig. 28).
HYDRAULIC LIFT WITH FRONT PTO
An implement is generally connected to the PTO via the hydraulic lifting kit+ cardan joint. Several
implements can be attached such as: flail mowers, snow throwers, brushes, snow blades...
Translation of the original instructions

MAINTENANCE SUMMARY TABLE

EVERY 8
HOURS
●
change
check ●
replace
replace
●
replace
●

IMPLEMENTS

AFTER 20 EVERY 50
HOURS HOURS
●
●
16
EVERY EVERY
100 200
HOURS HOURS
●
‫٭‬
●
●
●