Dispensing Group Wash For The Aep Version; Dispensing Group Wash For The Sae And Display Version; Cleaning The Group Shower Screen, Shower Screen Containment Ring And Filter Holder - Astoria Core600 AL Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour Core600 AL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63
7.5.4
Dispensing group wash
for the AEP version
Daily
Wash the dispensing groups as indicated below:
• Remove the filter from the filter holder and fit a blind filter
(see spare parts).
• Pour the specific cleaner into the filter holder with the blind
filter and hook it to the dispensing group.
• Carry out several dispensing cycles until the water comes
out clean.
• Remove the filter holder from the group and carry out
at least one dispensing cycle in order to eliminate any
cleaner residues.
• Remove the blind filter from the filter holder and replace it
with the original one.
Dispensing group wash
7.5.5
for the SAE and DISPLAY version
Daily
Wash the dispensing groups as indicated below:
• Remove the filter from the filter holder and fit a blind filter
(see spare parts).
• Pour the specific cleaner into the filter holder with the blind
filter and hook it to the dispensing group.
• On the pushbutton panel of the group being washed, simul-
taneously hold down the following buttons (
• Wait for the 5 wash cycles to be carried out.
• Remove the filter holder and press the
start the give or take 30-second rinsing cycle.
Those in possession of the "AL" version of the ma-
chine, must not perform the group wash operation.
USER Manual
7.5.6
Cleaning the group shower screen,
shower screen containment ring
and filter holder
Daily
Clean the dispensing group and filter holder shower screens
with the supplied brush on a daily basis.
Thoroughly clean the inside of the coupling ring and filter
holder, as well as the edge and the wings of the filter holder,
so as to eliminate any accumulated coffee residues.
Use the special brush supplied (see the Spare Parts
Catalogue).
Weekly
Clean the shower screen and shower screen containment ring
as follows:
• Loosen the screw using a screwdriver (1).
• Remove the shower screen (2) and the shower screen con-
and
).
tainment ring (3).
• Wash the two components with hot water.
• Reposition the shower screen and shower screen contain-
ment ring in their original position and lock everything in
place with the screw.
button to
3
2
1
61
216
of

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Core600 aepCore600 saeCore600 display

Table des Matières