Publicité
Les langues disponibles
Les langues disponibles
GB-NL-F-30
Fig.21
TO START THE ENGINE
Turn the keyswitch to the 'PREHEAT' position,
when the glow plug indicator lamp on the
instrument goes out continue turning the key to
the 'START' position. When the engine has
started, release the key and allow it to return to
the 'ON' position.
WARNING NOTES -
(a)
Do not turn key whilst engine is running.
(b)
If the engine fails to start within 10 seconds of
switching on, wait for a further 30 seconds
before attempting to start the engine again.
(c)
Do not allow the starter motor to run for more
than 30 seconds, otherwise failure of the starter
motor may result.
TO STOP THE ENGINE
(a)
Return the speed control lever to the "idle"
position.
(b)
Switch the key to the "off" position and remove
the key.
TO SLOW DOWN AND STOP THE MACHINE
(a)
Gradually release the pressure on the foot
pedal to allow the pedal to return to neutral and
the machine will come to a halt.
(b)
Disengage the drive to the cutting cylinders by
putting the control lever in the neutral position.
(c)
Apply parking brake.
TO REVERSE
The rear of the footpedal should be depressed gently
to obtain reverse motion of the machine.
NOTE: DO NOT move footpedal violently from
forward to reverse or vice versa. Always operate
slowly and smoothly.
TRANSPORTING
Transport speed is for highway use only. Never
select transport speed or 2 wheel drive on grass
areas or uneven or unsurfaced roads or tracks.
Transporting should always be carried out in 2
wheel drive.
The cutting units should be restrained in the raised
position with the safety catches.
1.
Start the engine and set the throttle lever to full
speed position.
2.
Release the parking brake and after ensuring
that the pedal control lever is in the transport
position, depress the upper pad of the
footpedal. The machine will then move forward.
NOTE: The foot should always be kept firmly on the
pedal. To relax the foot a jerky motion will
result.
3.
Continue to push down on the foot until the
desired speed of the machine is reached.
GB
Publicité
Chapitres
