Valve Lifter Inspection; Crankcase Cover Inspection; Assembling The Camshaft; Crankcase Cover Installation - Yamaha EF2000iS Manuel D'atelier

2
a
1
a
1
CRANKCASE COVER AND CAMSHAFT
1
b
1

VALVE LIFTER INSPECTION

1. Inspect:
9 Valve lifter
Damage → Replace.

CRANKCASE COVER INSPECTION

1. Inspect:
9 Crankcase cover 1
Damage → Replace.
9 Bearing 2
Noise/wear/rotational failure →
Replace.

ASSEMBLING THE CAMSHAFT

1. Install:
9 Valve lifter
9 Camshaft 1
NOTICE
Be sure to align the hole a of camshaft
gear with the crankshaft gear mark b.

CRANKCASE COVER INSTALLATION

1. Install:
9 Oil level switch 1
TIP
Pass the lead wire a of the oil level switch as
shown.
2. Install:
9 Oil level switch clamp 1
3-33
ENG
4.5 Nm (0.45 m · kgf, 3.3 ft · lbf)
4.5 Nm (0.45 m · kgf, 3.3 ft · lbf)