Assembling The Recoil Starter - Yamaha EF2000iS Manuel D'atelier

RECOIL STARTER, ROTOR AND CDI MAGNETO
b
1
b
1
2

ASSEMBLING THE RECOIL STARTER

1
1. Install:
9 Starter spring 1
9 Sheave drum 2
TIP
Engage starter spring outer hook a with
groove b on the sheave drum 2.
2
Carefully wind the spring counterclockwise
and place it on the sheave drum 2.
2. Install:
9 Starter rope 1
9 Sheave drum 2
TIP
Wind the starter rope 1 clockwise two turns
2
on the sheave drum 2.
3. Install:
9 Sheave drum 1
9 Starter rope 2
1
9 Starter case 3
2
TIP
Engage starter spring inner hook a with the
3
strut b of the starter case 3 and install the
parts.
4. Install:
9 Spring 1
9 Drive pawl 2
3-12
ENG
install the swing arm to the collar.