Yamaha EF2000iS Manuel D'atelier page 300

(FOR EUROPE)
1 Ground (earth) lead
2 Throttle control motor lead
3 Sub-wire harness 4-pole coupler
4 Sub-wire harness 3-pole coupler
5 Clamp
6 6-pole coupler
7 5-pole coupler
8 3-pole coupler
9 Control unit
0 2-pole coupler
q 4-pole coupler
w Noise filter
L W
B
L
WIRE ROUTING DIAGRAM
å Connect the ground lead wire as shown.
∫ To grand (earth) of the engine
ç Connect the coupler of the generator lead wire so
that its longer surface is directed in a vertical direc-
tion as shown.
∂ Degrease the adhesive surface, and install it as
shown.
´ To control box
ƒ Secure the clamp in a position as shown.
© Within 10 mm (0.4 in)
˙ White tape
ˆ To control unit
∆ To control box
7-18
SPEC