GMV 1000 Manuel D'installation Et Maintenance page 55

Table des Matières

Publicité

5.3.19
Solamente quando è ben
fissato e verticale, sganciarlo.
5.3.20
Togliere la maniglia di
sollevamento, la squadretta,
la flangia e l'OR.
5.3.21
Rimontare solo la maniglia di
sollevamento sulla testa dello
stelo (1s).
5.3.22
Molto delicatamente estrarre
lo stelo (1s) con la bronzina.
5.3.23
Reinserire la protezione
inferiore in gomma dello stelo.
5.3.24
Portare lo stelo in prossimità
della parete dove verrà
appoggiato.
Mantenendolo in verticale,
appoggiarlo delicatamente a
terra.
5.3.25
Togliere la maniglia di
sollevamento quindi sfilare la
bronzina.
Proteggendolo, appoggiare lo
stelo (1s) al muro e mettere la
bronzina a banco.
5.3.26
Togliere la guarnizione di
testa della bronzina e
conservarla con cura.
5.3.27
Imbracare sotto testa con le
due funi il cilindro (1c).
Liberarlo dai fissaggi,
appoggiarlo al muro, quindi
tolgiere le funi.
5.3.28
Imbracare l'elemento inferiore
(2) e, con le stesse modalità
adottate per l'elemento
superiore (1), portarlo in
posizione:
- appoggiato a terra
- bloccato
- in modo che rimanga in
posizione verticale.
26
5.3.19
Unhook it only when it is well
fixed.
5.3.20
Remove the lifting handle, the
bracket, the flange and the
OR.
5.3.21
Mount only the lifting handle
on the head of the stem (1s).
5.3.22
Gently remove the stem (1s)
with the bushing.
5.3.23
Reinsert the lower rubber
protection of the stem.
5.3.24
Move the stem near the wall
where it will be laid on.
Set it gently on the ground,
keeping it in vertical position.
5.3.25
Remove the lifting handle and
the bushing.
Lay the stem (1s) on wall,
protecting it, and set the
bushing on the working
bench.
5.3.26
Remove the head gasket of
the bushing and stock it with
due measures.
5.3.27
Sling the cylinder (1c) under
its head using the two ropes.
Free it from its fixing
elements, lay it on the wall
and remove the ropes.
5.3.28
Sling the lower element (2)
and, with the same methods
employed for the upper
element (1) position it:
- laid on ground
- blocked
- in order it remains in ver-
tical position
5.3.20
1
5.3.23
1s
1s
5.3.25
5.3.26
5.3.28
2
5.3.21
1
5.3.22
1s
5.3.27
1c
1s

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1001100810101008 bis1000 sl1001 sl ... Afficher tout

Table des Matières