Cleaning And Storage - DS Produkte HZ-S04 Mode D'emploi

EN

Cleaning and Storage

ATTENTION!
■ Caution: Risk of burns! Allow the device to cool down completely before cleaning it.
■ Danger of electric shock from water! Remove the mains plug from the plug socket
before cleaning the device.
■ Risk of damage to the device! Do not immerse the mixing bowl in water or other
liquids. No liquid must get into the bottom section of the mixing bowl as this is where
heating elements and other electronic components are fi tted. The mixing bowl must
not be cleaned in the dishwasher.
■ The device and all its accessories are not dishwasher-safe!
■ Clean the mixing bowl and the accessories immediately after each use to prevent
germ formation. Do not allow food residues to dry on.
■ Do not use any corrosive or abrasive cleaning agents or scouring sponges to clean
the device. These can damage the surface.
If the mixing bowl and cross-blade attachment are only slightly dirty, it is suffi cient
to clean them briefl y using water:
– pour 1 litre of water and a few drops of washing-up liquid into the mixing
bowl,
– close the mixing bowl with the mixing bowl lid,
– press the PULSE button a few times,
– rinse out the mixing bowl thoroughly with clear water.
1. Rinse out the mixing bowl briefl y under running water.
2. Remove the cross-blade attachment from the mixing bowl (see "Using Accessories
Correctly" | "Cross-Blade Attachment").
3. Clean all components apart from the motor unit thoroughly using mild detergent
and warm water. If necessary, remove the sealing rings for cleaning.
4. Wipe down the motor unit with a slightly damp cloth if necessary and then dry it with
a soft cloth.
5. Allow all parts to dry completely before the device is reassembled. Reattach all
sealing rings.
6. Store the device in a dry, clean place that is not accessible to children and animals.
The plastic parts may suffer discolouration over time. However, this does not have
any negative effect on either health or the way that the device parts work.
52