Use; Cleaning And Storage - DS Produkte EB609CP Mode D'emploi

Use

Illustration similar
5. Set the desired grain size for the spices using the grinder adjusting screw. The more
you turn the screw to the right, the fi ner the setting will be. The more you turn the
screw to the left, the coarser the setting will be.
6. Push the On / Off button to grind salt or pepper. During the grinding process, the
light is illuminated so you can see how much salt or pepper is dispensed by the mill.

Cleaning and storage

ATTENTION!
❐ Ensure that the battery holder or lower part of the product can not fall in water or
get wet.
❐ Do not use corrosive or abrasive cleaning products or cleaning pads to clean the
product. They could damage the product.
• Always clean the product with a damp cloth and mild detergent. Then wipe it off with
a dry cloth.
• Store the product in a clean, dry area that is not accessible to children.
1. Remove the upper part of the casing to be able to fi ll salt or pepper
in the mill. Slightly turn it to the right and pull it off to the top.
2. Remove the black battery holder from the bottom part of the ca-
sing and fi ll salt or pepper in the bottom part of the casing.
3. Place the black battery holder on the bottom part of the casing. In
the process, you must insert the grinder rod located in the bottom
part of the casing in the rotation receptacle on the bottom side of
the battery holder. The contacts, which are also located on the
bottom side of the battery holder must be placed on the contact
receptacles.
4. Put the upper part of the casing in place and turn it to the left until
it audibly locks into place.
14