DAZE Power Manager Manuel D'installation page 4

EN
01 - Introduction
The Power Manager is a device that dynamically adjusts the power allocated for vehicle charging to ensure that the contractual
power limit of the meter is not exceeded, preventing blackouts caused by charging.
There are two different versions, the Power Manager for DIN rail mounting (codes: PM02M, PM02T, PM02T100 - Fig. 1A) and the
compact version (codes: PM03M, PM03T30, PM03T100) for installations in confined spaces - Fig. 1B.
Dazebox C, Dazebox Home, Dazebox Share, Duo, and Urban can also operate without the Power Manager, as its installation is not
mandatory. However, without the Power Manager, there is no guarantee that a blackout will be avoided if the meter's power limit, set
via the app during network configuration, is exceeded.
The Power Manager consists of 2 elements:
- Control board CT box plastic
- Current sensor in single-phase version (PM02M PM03M) and three-phase 30kW version (PM02T PM03T30) in Fig. 1C and sensor for
three-phase 100kW version (PM02T100 PM03T100) in Fig. 1D.
For three-phase Power Manager versions, three current sensors are provided.
Fig. 1A
102
4.
Fig. 1B
1 2
47
37
3 4
40
Fig. 1C
16
30
29
Fig. 1D
24
38
45
52