Télécharger Imprimer la page

Siemens SIMATIC NET SINEC OS V2.4 Manuel De Configuration page 76

Pour scalance xch-300, xcm-300, xrh-300 et xrm-300

Publicité

Interface utilisateur
3.3 Opérations de base
localhost(config-switch-vlan-10,17-19)#
Exemple
Cet exemple montre que la sélection multiple d'interfaces n'est pas utilisable pour la création
d'interfaces VLAN.
localhost# config
localhost(config)# interface vlan6-9
Error: no matching instances found
localhost(config)#
Exemple
Cet exemple présente l'exécution d'une commande show pour les interfaces ethernet0/2,
ethernet0/3 et ethernet0/6 à ethernet0/8.
localhost# show running-config interface ethernet0/2,3,6-8 enabled
% The following list contains 5 entries.
interface ethernet0/2
enabled
exit
interface ethernet0/3
enabled
exit
interface ethernet0/6
enabled
exit
interface ethernet0/7
enabled
exit
interface ethernet0/8
enabled
exit
Exemple
Cet exemple présente l'exécution d'une commande show pour les interfaces des VLAN 1 à 6.
Les informations sont affichées pour les VLAN existants.
localhost# show interface vlan1-6 admin-status
% The following list contains 4 entries.
interface vlan1
admin-status up
interface vlan3
admin-status up
interface vlan4
admin-status up
interface vlan6
admin-status up
76
Command Line Interface (CLI) SINEC OS V2.4
Manuel de configuration, 10/2023, C79000-G8977-C498-07

Publicité

loading