Publicité
Les langues disponibles
Les langues disponibles
How to use the DVD
Recorder & VCR
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc
or you want to edit the disc after recording, select a
rewritable DVD-RW type disc. If you want to save a
recording without any changes, choose a non-
rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts for-
matting when an unused disc is inserted. This is
required for the preparation of recording on a disc.
Using a DVD-RW
This type of disc can be formatted in either DVD-
Video format (V mode) or DVD-Video Recording for-
mat (VR mode). For an unused disc, a message that
asks whether to initialize a disc or not. If you select
"Yes", disc will be formatted in VR mode. You can
play a V mode disc on various DVD components. A
VR mode disc allows more varied editing.
Using a DVD-R
Formatting disc is unnecessary and only V mode
Recording is supported. You can play this type of disc
on various DVD components only when they have
been finalised.
You can only use either the VR or V mode
on a DVD-RW, but not both at the same
Note
time.
You can change the DVD-RW format to
another format. It should be noted that the
data of the disc may be lost when
changing formats.
Step 3
Recording
There are two different recording methods: Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once, Daily or Weekly
Recording mode : XP (high quality mode), SP
(standard quality mode), LP (long recording mode),
and EP (extended mode).
Step 4
Playing
You can select the title you want to play in a
displayed menu and then immediately start playback.
A DVD consists of sections called titles, and sub
sections called chapters.
During recording, a title is created between two
points where you start and stop recording.
Chapters will be created automatically when you
finalise recording on DVD-RW/-R discs in V mode.
The chapter's length (interval between chapters)
varies according to the recording mode.
Step 5
Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RW in VR mode)
With this recorder, you can create a new playlist on
the same disc and edit it without the change of the
original recording.
English - 9
Publicité
