Publicité
Les langues disponibles
Les langues disponibles
Connecting the
S-Video Cable
You will enjoy high quality images. S-Video seperates
the picture element into black and white(Y) and
colour(C) signals to present clearer images than
composite video output mode.
Connect one end of the S-Video cable into the
1
S-VIDEO output jack on the rear of the DVD
Recorder & VCR.
2
Plug the other end of the S-Video cable into the
appropriate input connector on the television.
Connect one end of the audio cable supplied into
3
the AUDIO output jacks on the rear of the DVD
Recorder & VCR.
• Take care to respect the colour coding of the left
and right channels.
Plug the other end of the audio cables into the
4
appropriate input connectors on the television.
Connecting the
Component Video Cable
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture
element into black and white(Y), blue(P
signals to present most clear and clean images.
1
Connect Component video cables between the
COMPONENT VIDEO OUT jacks on the rear of
the DVD Recorder & VCR and COMPONENT
VIDEO IN jacks on the rear of the TV.
2
Connect audio cables between the audio output
jacks on the rear of the DVD Recorder & VCR and
AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of the up
and down channels.
• Press the input selector on your TV remote
control until the Component signal from the DVD
Recorder & VCR appears on your TV screen.
COMPONENT INPUT
), red(P
)
B
R
English - 19
Publicité
