Publicité
Les langues disponibles
Les langues disponibles
Playing back a VHS
Tape (VCR)
1
Insert a standard VHS tape into the VCR deck.
• When a videotape is inserted, power will turn on
automatically.
Press the √
II
(PLAY/STILL) button on the remote
2
control or on the front panel of the unit. The video-
tape will begin to play automatically if the Record
Safety Tab is removed and Auto Play is turned on.
3
Press the
(STOP) button on the remote control
or on the front panel of the unit.
Tracking
The Tracking adjustment removes the white lines that
sometimes appear during playback because of slight
differences in recording decks. The PROG/TRK (
button will automatically align the recorded tracks with
the playback heads to solve this problem.
You may also set tracking manually.
1
Adjust Tracking Manually
During playback, press the PROG/TRK (
buttons to remove white lines from the picture.
Special VCR Playback
Features
While a videotape is playing, you can enjoy a variety of
special playback features.
Still
In Play mode, press √
a single frame.
Frame Advance
In the Still mode, press F.ADV/SKIP button to
advance to the next frame.
Fps/Rps
In Play mode, press Forward (√√) button or Rewind
(œœ) button to Fps/Rps at two speeds:
• Picture Search - Press and release repeatedly to
advance the tape forward or backword at 2,3,5,7
times normal speed.
• Jet Search - Press and hold to advance the tape
forward or backward at 7 times normal speed.
Skip
In Play mode, press F.ADV/SKIP button to cue
ahead exactly 30 seconds. Press F.ADV/SKIP button
repeatedly up to 4 times to cue ahead 2 minutes.
Slow motion
In Still mode, press √√ button for slow motion. Press
the √√ button repeatedly to vary slow motion speed
from 1/5 to 1/30 of normal playback. Press the PLAY
button twice to resume normal viewing.
/
)
/
)
II
(PLAY/STILL) button to still
English - 55
Publicité
