Publicité
Les langues disponibles
Les langues disponibles
Basic VCR Recording
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a
blank tape and pressing the
even add time in preset increments up to 9 hours by
pressing the
(REC) button repeatedly.
Be sure your videotape has a Record Safety Tab.
If the tab is missing, you can cover the opening
Note
with a small piece of tape.
Warning: Do not cover this opening unless you
are sure you want to record over the tape.
CAUTION
1
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the
entire programme.
2
Press the Number buttons or the PROG/TRK (
/
) buttons to select the desired channel.
Press the INPUT SEL. button to select AV1,
AV2, AV3 (or DV input : DVD-VR331,VR335,
VR336 only) if recording from an external device
connected to the input jacks of the recorder.
3
Press the REC SPEED button on the remote
control to set the Record Speed to one of the
following options:
• SP – Standard Play, for best picture quality.
• LP – Long Play, for maximum recording time
(3 times SP).
The selected Record Speed will appear on the
front panel display and on-screen display.
Note
(REC) button. You can
Maximum Recording Time - SP vs. LP
Tape Length
Recording Time (in SP)
E180
180 mins or 3 hours
E240
240 mins or 4 hours
E280
280 mins or 4 hours and 40mins
E300
300 mins or 5 hours
When you watch or record on the VCR during DVD
Recording, some function buttons may not operate.
Note
The message "This function is not available." will
be displayed.
4
Press the
(REC) button on the remote control or
front panel.
For options while recording is in progress, see
"Special Recording Features".
Press the STOP button to stop or finish a record-
5
ing in progress.
Pausing / Resuming
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch programme by pressing the
PROG/TRK (
) buttons while recording pauses.
/
Check Remaining Time
1
Press INFO button on the remote control.
The following information will be displayed.
(Current deck status, recording speed, remaining
time, input channel, current time.)
-RW
STOP
00:00:00
SP
Rem 00:48
PR 1
JAN 01 2006 SUN
VCR
STOP
00:00:00
SP
Rem 01:21
PR 1
12 : 00
English - 65
Publicité
