Publicité
Les langues disponibles
Les langues disponibles
Setting Up the Display
(Video) Options
This function allows you to setup the TV screen
settings.
With the unit in Stop mode/No Disc mode, press
1
the MENU button.
Press the ...† buttons to select Setup, then press
2
the OK or √ button.
DVD-Recorder
No Disc
Programme
System
Clock Set
Setup
Language
Audio
Video
Parental Control
Install
MOVE
OK
Press the ...† buttons to select Video, then press
3
the OK or √ button.
Video option menu will be displayed.
DVD-Recorder
No Disc
Programme
TV Aspect
3D Noise Reduction
Setup
Video Output
DivX(R) Registration
MOVE
OK
Press the ...† buttons to select the desired video
4
option, then press the OK or √ button.
Press the ...† buttons to select the desired item,
5
then press the OK or √ button.
Press the RETURN or œ button to return to the
previous menu. Press the MENU button to exit
Note
the menu.
32 - English
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
RETURN
EXIT
Video
: 16:9 Wide
√ √
: Off
√ √
: Component
√ √
√ √
RETURN
EXIT
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select this when you want to see
all the 16:9 ratio picture from the
DVD, even though you have a TV
with a 4:3 ratio screen. Black bars
will appear at the top and bottom
of the screen.
• 4:3 Pan - Scan : Select this for conventional size
TV when you want to see the cen-
tral portion of the 16:9 screen.
(Extreme left and right side of
movie picture will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on
your wide-screen TV.
3D Noise Reduction
(motion adaptive noise reduction)
• Off : Normal
• On :
Provides a clear picture through noise
reduction (for recording).
This function depends on disc type. It may not
work for some disc types.
Note
Video Output
You can enjoy high quality image through RGB or
Component video connection.
• Component : Select this when the Recorder is
connected to a TV with Component jack.
• RGB : Select this when the Recorder is
connected to a TV using SCART cable.
In Component mode, you can set video output to
Progressive (P.SCAN) or Interlace, see page 38~39.
Available video output jacks are as follow.
Available Video Output Jack
Component mode
Setting mode
Output jack
P.SCAN off mode (Interl a ce mode) P.SCAN on mode
Component Output
O
(Y, P
, P
)
B
R
R, G, B
X
AV1 Scart
Composite
O
Composite Video out
O
S-Video out
O
RGB Mode
O
X
(TV i n progressi v e mode)
X
O
O
X
O
O
O
O
Publicité
