Using the SetEvent Menu
Although the 301EM is fully configured with specific event configurations (see the tables in Appendix A for de-
tails on available configurations), it is nonetheless possible to modify events to suit different applications.
Scroll to the SetEvent menu and press enter to select.
•
If this is the initial setup and no previous events have been configured, you must select the event configuration
(Type) from the menu (see the tables in Appendix A for details).
Use the arrows to scroll through the options and press enter to select. The available options (de-
•
scribed in greater detail in Appendix A) are: Type1 CND, Type2 CND, Type3 US, Type # 4 and
OTHER.
Danger: Selecting the "OTHER" event type cre-
ates an event with all fields and events blank.
Therefore, no events will appear when pressing
the arrows. Events must be created before they
appear in the scroll list.
Caution: To comply with ASHRAE 15 and CSA
B52 standards, Type 1, 2 or 3 must be used.
Once the configuration type has been selected, it
can no longer be changed without erasing ALL
events and reconfiguring the system anew. Con-
sult the tables in Appendix A to make certain that
the appropriate event configuration is selected.
91
Menu
SetEvent
SetEvent
Type 1 CND