Icons And Their Meanings - Honeywell 301 Serie Mode D'emploi

Icons and their meanings

Icon
BACNet: Indicates that there is a BACNet module present and that it
is communicating with the controller.
BACNet error: Indicates that a BACNet module is present but com-
munication with the controller has failed (error)
Debug: Indicates whether the controller is in debug mode (Single TX,
Debug or Simulation modes). When in simulation mode, SIM ap-
pears next to this icon.
Log: Indicates that either "Tx Logging" or "Event logging" is enabled.
SD card size support:
Software version 1.085 and previous – 512M
Software Version 1.086 and above – 2G
Log error: Indicates that an error occurred during TX or Event log-
ging. All logging functions are stopped.
SDC: Indicates that an SD card is present and functioning. The icon
"fills" (from white to black) progressively as memory is used. A white
icon indicates empty memory and black indicates full memory.
SDC error: If this symbol persists for more than 5 seconds, an SD
card is present but not functioning properly.
Wireless network: Indicates that the wireless network coordinator
(wireless communication module) is present and communicating
with the controller.
Wireless network error: Indicates that the wireless network coordina-
tor (wireless communication module) is present but is not communi-
cating with the controller.
24
Description