Led Definitions - Honeywell 301 Serie Mode D'emploi

LED Definitions

The controller is equipped with 7 LEDs that provide a status for each function re-
lated to that indicator:
LED
A blinking red light indicates that an event has been activated. A con-
stant red light indicates that one or more transmitters have reached
Alarm A
Alarm A or Alarm 1.
When the red indicator is on, one or more transmitters have reached
Alarm B
Alarm B or Alarm 2.
When the red indicator is on, one or more transmitters have reached
Alarm C
Alarm C.
Green indicates that the unit is powered up and functional
Power
When the amber LED is on, it indicates a fault (i.e. a communication,
Fault
maintenance or device problem)
When the amber LED is blinking, it indicates that the controller is
sending information or requests on the communication channel.
Tx
When the green LED is blinking, it indicates that the controller is re-
Rx
ceiving information.
Each of these functions is linked to parameters programmed in the control unit,
which we will discuss in the following section.
20
Description