Dynamic Host Configuration; Naming - Honeywell 301 Serie Mode D'emploi

Dynamic Host Configuration

The next screen allows the device DHCP (Dynamic Host Configuration Protocol) to be enabled or disabled.
• Press Enter to change the field value.

Naming

The Device Name screen allows a specific name to be assigned to the BACNet device.
For more information on this subject, please consult the ASHRAE standard number 135-2001, Annex J, sec-
tion J5.
The BACnet port number is fixed at hexadecimal 0xBAC0 or decimal 47808. It will not function with other port
numbers.
The following tables are also available on the Honeywell Analytics' Commercial Products CD that accompanied
the 301-C controller and from the Honeywell Analytics technical library (www.honeywellanalytics.com > Prod-
ucts > Commercial Solutions > 301-C > Technical Library).
110
9. BACNet
-DHCP : disabled-
Enable DHCP
9. BACNet
-Device name-
Edit (20 char.max)
301C:1