Delays Menu; Latch Mode - Honeywell 301 Serie Mode D'emploi

Delays Menu

This option allows Before and After settings that will delay the activation or deacti-
vation of an action to be programmed.
Before Delays the action for the specified length of time. If the condition per-
sists beyond this delay, the defined action is executed.
After The time to wait after an event has returned to normal before return-
ing action output to normal state. The after delay also offers a Latch
option, described below.
3. Events 001
-Delays-
Before: 99min
After: 01min
Before and After delays can be configured at either 30 or 45 seconds or from 1 to
99 minutes, in one minute increments. Five dashes (‐‐‐‐‐) indicates that no delay
has been programmed.
•
Use the keypad arrows to scroll to the desire option
•
Press Enter to select the option
•
Use the keypad arrows to scroll through the second or minute settings
•
Press Enter at the desired setting. The delay is set.

Latch Mode

•
The Latch function is executed on an Event state
•
It is possible to select the Latch mode by changing the after delay to "latch"
•
The Event stays active until the Silence keypad button is pressed
•
The Silence keypad button has two functions: Silence the buzzer and unlatch
the event.
•
When the Silence keypad button is pressed, events in Latch mode are un-
latched and reevaluated. If the Event condition persists, the Event remains ac-
tive and returns to Latch mode. If the condition does not persist, the event is
deactivated.
Note: If the Event has a Before delay and the Silence button is pressed while the
Event conditions are still true, the buzzer will be silenced only for the length
of the programmed delay.
39