Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
System Programming
The system's Normal programming mode offers several menu options that are ac-
cessible from the main menu screen:
Mode
1. Tx Info
Allows transmitter parameters to be programmed
2. Groups
Allows sets of multiple transmitters to be aggregated for simpler
programming of a common response.
3. Events
Facilitates creation of logical terms which respond to transmit-
ters or events. These Boolean outputs can respond to concen-
tration, alarm, or fault status. These events facilitate voting
within a group and can drive relay outputs.
4. Acqui
Allows the datalogging feature to be activated or deactivated
5. Copy
Allows data or parameters to be copied from the (controller) con-
figuration to parameters
6. Config
Allows system parameters and password to be set
7. Network
Allows actions on the network to be performed, communication
statistics to be consulted, and remote calibrations to be per-
formed
8. Tests
Allows each device to be tested sequentially (inputs, outputs,
communications, events, etc.) and operation of various parame-
ters to be validated
9. BACNet
Allows a device's BACNet parameters to be set
10. Wireless
Not supported.
Note: Access to the programming functions is password protected. The default
password is 2967.
22
Description
Publicité
Table des Matières
