Network Menu - Honeywell 301 Serie Mode D'emploi

7. Network Menu

The Modbus network menu allows network device information to be either scanned
or reset.
This menu offers four options, divided into two screens; the first screen contains
three options:
Option
Resets all network device Tx information in the database.
Reset
This only resets the Tx information for the network device. It does not
Database
affect programmed Groups or Events.
Begins an auto‐detect of all network devices that allows the system to
configure the Tx database for network devices (i.e. it will scan and add
new devices but will not overwrite or erase the old database). This
Network
process takes approximately one minute.
Scan
Reset and Performs both previous functions simultaneously.
Scan
7. Network
Reset Database
Scan Network
Reset and Scan
Note: Once one of these options has been set, wait until the controller completes
the process. Do not interrupt or stop the process once it has begun.
Second Network screen offers the Statistics and Calibration options.
7. Network
Statistics
Calibration
Selecting Statistics from the Network menu displays a screen containing the statis-
tics for the selected device address.
Statistics
Valid 16
Errors 0
Timeouts 0
54
001
100%
0%
0%
Description