Status - Honeywell 301 Serie Mode D'emploi

The Coverage Period screen allows the period that will be covered by the Event to
be defined. (The time frames for each of these periods can be defined in the con-
troller Config menu.) This option provides two further selection fields:
Day definition field: allows All day, Daytime, or Nighttime to be selected
Week definition field: Weekend, Working Days, All week
3. Events 001
-Coverage Period-
All day
All week
1.
Use the keypad up or down arrows to scroll to either All day or All week
2.
Press Enter to select. The value can now be changed
3.
Use the keypad up or down arrows to scroll through options (see above)
4.
Press Enter to select.

Status

This screen displays the current event status and allows it to be either enabled or
disabled, depending on the current status.
Enable event: Toggles between Enable and Disable.
3. EVENT 001
-Status : disabled-
Enable event
After going through all the steps and programming an event, this screen will display
"Enable event". Press Enter to activate all the parameters and enable the Event.
If an existing Event is being consulted, this screen would display "Disable event".
Press Enter to disable an Event (it will not be deleted but will not function). The
programming of this Event is always present, which means that it easily can be re-
activated by scrolling to this screen and pressing Enter.
44
Honeywell Internal