Deactivating The Buzzer; Configuring The Unit's Alarms - Honeywell 301 Serie Mode D'emploi

Deactivating the Buzzer

The 301EM is shipped with the buzzer function activated by default. This menu lets you activate or deactivate
the Silence button on the keypad and to silence or activate the key beep function.
Access the menu and use the arrows to scroll to the Buzzer menu and press enter to select. The dis-
•
play moves to the next screen.
•
The Silence screen displays Yes?, press enter to select (or scroll to No? to disable the Silence but-
•
ton). The keypad Silence button is enabled; when the buzzer sounds, pressing the silence button will
turn the buzzer off.
•
The next screen, Key Beep, allows you to activate a sound for any key activation. Use the arrows to
•
display either Yes or No and press enter to confirm.
The screen returns to the main menu
•

Configuring the Unit's Alarms

Although the 301EM is shipped with the default alarm settings, this menu allows you to set specific minimum
and maximum levels for alarms A, B and C.
Access the menu and use the arrows to scroll to the Set Alr. menu and press enter to select
•
The menu displays the first sensor's information screen. Use the up or down arrows to scroll between
•
sensors and press enter when the desired sensor is displayed.
The next six screens let you modify both the minimum and maximum alarm setting for all alarm levels
•
(A, B, C). Use the arrows to scroll and press enter to select the desired alarm.
In the selected alarm screen, use the arrows to increase or decrease the value and press enter to con-
•
firm the desired value.
The screen returns to the first sensor menu
•
Repeat these steps for each alarm level to modify.
94
Menu
Buzzer
Silence
Yes?
Keep Beep
No?
Menu
Set Alr
HS2 #1
SD #1
HS2 #1
Min AlrA
Min AlrA
9.0 PPM