Configure Analog Input (Configai); Configure Digital Input (Configdi) - Honeywell 301 Serie Mode D'emploi

Configure Analog Input (ConfigAI)

The steps below show the "ConfigAI" menu progress for each main menu option.
ConfigAI En/Dis?: This option lets you configure whether a transmitter is enabled or not or simply to verify its
status. The screen displays the transmitter number and whether it is enabled or not.
Use the Up and Down buttons to scroll through all 16 analog inputs, or transmitters.
•
Use the Enter button to change a transmitter's status from Enabled to Disabled (depending on status
•
displayed)
When you are done configuring input statuses, press ESC to return to the main menu. Pressing ESC
•
will not cancel the changes you made.

Configure Digital Input (ConfigDI)

The steps below show the "ConfigDI" menu progress for each main menu option.
ConfigDI En/Dis?: This option lets you configure whether a transmitter is enabled or not or simply to verify its
status. The screen displays the transmitter number and whether it is enabled or not.
Use the Up and Down buttons to scroll through all 8 contact inputs.
•
Use the Enter button to change a contact input's status from Enabled to Disabled (depending on status
•
displayed)
When you are done configuring input statuses, press ESC to return to the main menu. Pressing ESC
•
will not cancel the changes you made.
76
ConfigAI
En/Dis?
AI01
Enabled
ConfigDI
En/Dis?
DI01
Enabled