System Log Menu - Honeywell 301 Serie Mode D'emploi

System Log Menu

The controller will record log information to its internal memory. If the controller is
equipped with an SD card, the system log function allows users to save system log
information to the memory card in text format.
5. Copy
-System Log-
SysLog to SDcard
When this option is selected, a log of all the last actions performed on the controller
is copied to the SDcard, with the filename slyymmdd.log. This file can contain up
to a maximum of 64Kb of information in text format. Once the memory card is full,
the oldest log entries are erased and replaced by new entries. Here is an example
of a system log:
--- START of system log dump : 2007-04-18 13:19:05 ---
2007-04-04 18:42:06;Accessing menu;
2007-04-04 18:43:47;Event 1 definition modified;
2007-04-04 18:48:12;Exiting menu;
2007-04-04 18:54:49;System power-down;
2007-04-04 18:56:40;System power-up;
2007-04-04 19:02:44;Accessing menu;
2007-04-04 19:03:07;Event 6 definition modified;
2007-04-04 19:03:21;Exiting menu;
2007-04-05 10:51:28;Accessing menu;
2007-04-05 10:54:59;Database reset;
2007-04-05 10:55:18;Tx 25 parameters modified;
2007-04-05 10:55:29;Group 0 definition modified;
2007-04-05 10:55:36;Group 0 definition modified;
2007-04-05 10:55:46;Group 0 definition modified;
2007-04-05 10:55:55;Group 4 definition modified;
2007-04-05 10:55:57;Exiting menu;
2007-04-05 10:56:02;Accessing menu;
2007-04-05 10:56:19;Tx 24 parameters modified;
50