Changing Silence Settings - Honeywell 301 Serie Mode D'emploi

Changing Silence Settings

The unit user interface contains a "Silence" pushbutton. This button is only functional if the Silence setting has
been activated for each option using this menu.
1. Press an arrow to scroll to the Menu Silence option and press Enter to select.
2. Silence Rel #1 appears on the screen. Press an arrow to scroll to the desired relay number (or Buzzer)
and press Enter to select.
3. The screen now requests confirmation. Use the arrows to scroll to the desired setting (Yes activates the
Silence pushbutton for the specified relay or buzzer, No leaves the pushbutton inactive) and press En-
ter to confirm the new setting.
4. Once the new value is accepted, the unit returns to the Silence Rel #1 screen.
Repeat for other options.
Selecting buzzer means that pressing the Silence
key will turn off the unit's audible alarm.
Selecting Rel #1, #2 or #3 means that pressing the
Silence key will deactivate a relay that was activated
by an alarm.
Activating Key Beeps
This function activates the Beep function, which makes the unit emit a beep whenever a pushbutton is
pressed:
1. When the screen displays the Menu KeyBeep option, press the Enter pushbutton to select.
2. Press an arrow pushbutton to scroll to Yes or No and press Enter to set the new value. The display re-
turns to the Menu Set ADR. screen.
3. Press an arrow to scroll to the next desired option or to the QUIT screen and press Enter to confirm the
selection or exit the programming menus.
66
Menu
Silence
Silence
Rel #1
R1 = Yes?
Menu
KeyBeep
KeyBeep
No?