Table des Matières
Publicité
LOWR
SHIMMING
All manuals and user guides at all-guides.com
Reverse gear
6-32
2. Adjust:
Forward gear backlash
Remove or add shim(s).
Forward gear
Shim thickness
backlash
Less than
To be decreased
by (0.51 – M) × 0.49
0.31 mm (0.021 in)
More than
To be increased by
(M – 0.51) × 0.49
0.72 mm (0.028 in)
Available shim thickness:
1.0, 1.1, 1.2, 1.3, and 1.4 mm
1. Measure:
Reverse gear backlash
Out of specification → Adjust.
Reverse gear backlash:
0.93 ~ 1.65 mm (0.037 ~ 0.065 in)
Measuring steps:
Set the shift shaft in the reverse posi-
tion.
Load the reverse gear by installing the
propeller without the collar 1 and
then tighten the propeller nut.
Propeller nut:
5 Nm (0.5 m • kg, 3.6 ft • lb)
Attach the backlash indicator onto the
drive shaft (16 mm diameter).
Backlash indicator 2:
90890-06706
Attach the dial gauge onto the lower
unit and have the dial gauge plunger
contact the mark on the backlash indi-
cator.
E
Publicité
Table des Matières
