Surewerx JACKSON WH70 BH3 Mode D'emploi page 13

Markings
BH3
WF70 GDS
4 / 6-8 / 9-13
SM
1/1/1/1
EN 379
EN 175
EN 166
EN 12941
EN 14594
AS/NZS 1337.1 Number of the standard (welding helmet)
AS/NZS 1338.1 Number of the standard (autodarkening welding filter)
ANSI Z87.1
S
B
9
DIN
DIN Plus
Note: The above is an example.
12
Product name of the helmet shell
Product name of the autodarkening welding filter
4 - Protection shade number in open state
6-8 / 9-13 - Protection shade numbers in closed state
Manufacturer identification code
Optical classes (optical quality, light scattering, homogeneity, angu-
lar dependence)
Number of the standard (autodarkening welding filter)
Number of the standard (welding helmet)
Number of the standard (welding helmet)
Number of the standard (welding helmet combined with powered
filtering devices)
Number of the standard (welding helmet combined with compressed
AIR breathing apparatus)
Number of the standard (autodarkening welding filter and welding
helmet)
Increased roboustness
Medium energy impact resistance mark
Molten metals and hot solids resistance mark
CE mark
Conformity symbol for DIN
Conformity symbol for DIN Plus
Instruction Manual
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative con-
sequences for the environment and human health, which could oth-
erwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service
or the shop where you purchased the product.