SilverCrest SKGE 2000 C3 Mode D'emploi page 18

Cleaning and care
Safety instructions
WARNING! DANGER TO LIFE DUE TO ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
► Before cleaning, pull out the plug and wait until the appliance has
completely cooled down. Risk of injury!
► Never clean the appliance under running water and never immerse it in water.
The appliance could be irreparably damaged!
CAUTION
Damage to the appliance!
► To avoid irreparable damage to the appliance, ensure that no moisture can
penetrate the appliance during cleaning.
► When cleaning the surfaces use neither abrasive or chemical cleaners, nor
sharp or scratchy objects.
Draw the cleaning scraper w over the hotplates 0 after the hotplates 0
■
have cooled down so that fat and residues are aggregated, and then slide
them into the fat collector tray 7.
Wipe the hotplates 0 with a damp cloth. Do not use any abrasive cleaning
■
agents, rough sponges or sharp objects for cleaning as these could damage
the non-stick coating.
For more stubborn soiling or hardened residue, remove the hotplates 0:
–
Open the appliance.
–
Press the RELEASE button 8 and at the same time, remove the lower
hotplate 0.
–
Hold the upper hotplate 0 in place to prevent it from falling and press
the RELEASE button q. The upper hotplate 0 is released from the
appliance.
Clean the hotplates 0 which have been removed in warm water with a little
detergent in it. For severe incrustations, leave the hotplates 0 to soak for a while
in the water. After washing, rinse the hotplates 0 with clean water to remove all
detergent residues. Dry everything properly. The hotplates 0 must be dry before
you put them back in the appliance!
SKGE 2000 C3
GB │ IE │ 15 ■