SilverCrest SKGE 2000 C3 Mode D'emploi page 13

Heat level control
The temperature is set using the heat level control 6.
–
Heat level range 1: heating up range / low temperature
–
Heat level range 2: medium temperature (e.g. cooking vegetables)
–
Heat level range 3: high temperature (e.g. grill-roasting meat)
Heat level range 3
NOTE
The green „Ready" control lamp 5 lights up when the heat level control 6
►
is set to MIN or in the front area of the heat level range 1. As soon as you
set the heat level control 6 to the desired position, the green control lamp
"Ready" 5 goes out until the temperature has been reached.
The green control lamp "Ready" 5 may switch off again in the interim. This
►
indicates that the temperature has fallen below the set temperature and the
appliance is heating up again.
The red control lamp "Power" 4 lights up as soon as the appliance is con-
►
nected to the mains.
Operation
1) Close the appliance lid using the handle.
2) Slide the fat collector tray 7 into the appliance.
3) Replace the plug in the mains power socket. The red control lamp "Power" 4
lights up. The green control light "Ready" 5 lights up if the heat level control 6
is set to MIN.
4) Set the desired level on the heat level control 6. The green control lamp
"Ready" 5 goes out. The green control lamp "Ready" 5 comes on again
as soon as the set heating level is reached.
■ 10 │ GB │ IE
Heat level range 1
Heat level range 2
SKGE 2000 C3