MBM FTG74A Manuel D'installation Et D'utilisation page 30

ger) are detailed in the specific chap-
ter concerning these issues.
Do not obstruct the heat ex-
traction
openings.
Do not leave flammable objects
or material near the appliance.
electrical) upstream the appliance
whenever you need to work in safe
conditions.
Whenever it is necessary to
operate inside the appliance
(connections, commissioning,
checking operations, etc.) prepare for
the necessary operations (removal of
panels, elimination of supply) in com-
pliance with the safety conditions.
If the thermostat is replaced,
fit one of the same model,
see ILL sect. - REF. i)
DUTIES AND QUALIFICATIONS
REQUIRED OF OPERATORS
Prohibition for the homogene-
ous operator to perform any
type of operation (maintenance
and/or other) without having first read
the entire documentation.
The information con-
tained in this document
is for the use of the
qualified technical operator who is
authorised for: handling, installation
and maintenance of the appliance in
question.
The
structions have been
drawn up for the "Gene-
ric" operator (Operator with limited
responsibilities and tasks). Person
authorised and employed to operate
the appliance with guards active and
capable of performing routine main-
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
and/or dissipation
Disconnect all sup-
plies if present
(e.g. water - gas -
operating
tenance (cleaning the appliance).
The operators who use the ap-
pliance must be trained in all
aspects concerning its function-
ing and safety features. They must
therefore interact using appropriate
methods and instruments, complying
with required safety standards.
The "Generic" operator must
operate on the appliance after
the technician has completed
installation
electrical, water, gas and drain con-
nections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of inter-
vention and the relevant work zones,
the following classification is provi-
ded:
• Dangerous zone: any zone within
and/or in proximity to a machine in
which the presence of an exposed
person constitutes a risk in terms of
the health and safety of such a per-
son;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when oper-
ating in such a way as to avoid
endangering the safety of the operator
in case of unexpected circumstances
The following are also danger
zones / • All the work areas within
the appliance • All the areas protect-
ed by appropriate safety and protec-
tion systems such as safety photo-
cell photoelectric curtains, protective
in-
panels, interlocked doors, protective
casing.
• All the zones within the control
units, electrical cabinets and junction
boxes.
• All the zones around the appliance
in operation when the minimum safe-
ty distances are not being respected.
- 6 -
(transportation, fixing
.