Gallignani GA FB 12 Manuel D'utilisation Et D'entretien page 137

PROBLEM
Difficult--to--harvest crop.
Pick--up tine breakage.
Frequent breakage of shear-
bolts.
SECTION 5
TROUBLESHOOTING
PICK- -UP
POSSIBLE CAUSE
Pick--up setting too high.
Baling operation made on un-
suitably--arranged swaths.
Bent or broken pick--up tines.
Too high inching speed.
Too low swath.
Bent pick--up reel.
Pick--up working too close to the
ground.
Too high inching speed.
Baling operation made on un-
suitably--arranged swaths.
Incorrect adjustment of the win-
dguard.
Faulty shearbolts.
Foreign bodies in the swath.
REMEDY
Lower the pick--up assembly
using the tractor hydraulic con-
trol valve lever.
Adjust the pick--up gauge whe-
els.
Prepare even swaths.
Replace bent or broken tines.
Reduce the inching speed or ra-
ke to get larger swaths.
Rake to get a thicker swath.
Straighten or replace the tines.
Adjust the gauge wheel height.
Reduce the inching speed.
Prepare even swaths.
Adjust stroke and pressure of
the swath windguard tines.
Replace the shearbolts.
Lift the reel as much as possible,
to prevent stone inlet.
Page
E
N
--
G
L
I
4--2
S
H
3--2
--
3--2
3--2
4--2
3--2
4--3
3--7
4--2
5- -1