Endress+Hauser ASP Station 2000 Mode D'emploi page 83

ASP Station 2000
Endress+Hauser
The programme has been started
Fig. 17: "Off" key, active running programme
Fig. 18: "Off" key, break mode
"Rep" key
Fig. 19: "Rep" key
Example of a report list
Report
Unit on
Unit off
Power on
Power off
Ext hold active
Ext hold end
Int hold active
Int hold end
NT/ST changeover
ST/NT changeover
If a programme is running, pressing the "Off" key briefly (<=
approx. 1 s) sets the programme to break mode.
If the key is pressed for a longer period (> 1 s), it terminates
the running programme.
In the break mode, the user can decide whether the pro-
gramme should be terminated. The programme is termina-
ted by pressing the "Off" key again. If the programme should
be resumed, the programme is resumed once the "On" key
is pressed. Here, the tap goes through its reference position
once and then on to the current bottle. Any bottle changes
which are due to take place during the break period are per-
formed.
Press the "Rep" key to activate the display of the report list.
Events are logged in this list while the device is switched on.
A maximum of 30 reports are stored. The reports are stored
in a ring memory. If the ring memory is full and a new report
occurs, the oldest report is deleted.
Report on the display
5 Operation
Report list
14:12 11.01.98
Unit on
14:12 11.01.98
Unit off
14:12 11.01.98
Power on
14:12 11.01.98
Power off
14:12 11.01.98
Ext. hold active
14:12 11.01.98
Ext hold end
14:12 11.01.98
Int. Hold active
14:12 11.01.98
Int hold end
83