Operation; Quick Operation Guide - Endress+Hauser ASP Station 2000 Mode D'emploi

5 Operation

!
#
82
5 Operation
5.1

Quick operation guide

Note!
Before switching on, please read Sections 6.1 "Function check" and 6.2 "Switching on the measu-
ring device".
Start sampling
programme
Start manual Switch unit on
sample
and off
Fig. 15: Quick operation guide
"Man" key
Fig. 16: "Man" key
Caution!
The sample is discharged at the point where the tap is currently located. If the tap has been adjusted
or if a programme has not been started after switch-on, the tap can be located between two
discharge positions.
"Off" key
The "Off" key has different functions depending on whether a programme has been started or not.
Programme has not yet been started
If a programme has not been started, pressing the "Off" key simply switches off the device. This
means that the "Man", "Aut" or "->" keys are no longer available.
"Quick Setup";
Setup;
Scroll
Basic settings;
buttons
Service;
Sampling
programmes
The "Man" key is used to trigger immediate sampling regard-
less of whether a programme has been started or not. The
sampling process starts immediately once the key has been
pressed.
ASP Station 2000
Report list
Probe statistics
Endress+Hauser